תיאור
הנתב החדש מבית LINKSYS מדגם lapac1750 הינו נתב חדש בתקן 802.11ac העובד בשני תדרים במקביל 2.4 GHz + 5 GHz מתאים לבתים ולעסקים.
נתונים טכניים:
- הדור החדש של הרשתות האלחוטיות Wi-Fi 802.11ac עם תמיכה בשני תדרים במקביל 2.4 גיגה ו5 גיגה בקצב של עד 1750 מגה לשניה !
- חיבור רשת PoE+ מובנה המאפשר התקנה ללא נקודת חשמל (מצריך נתב תומך)
- חיבורי רשת Gigabit
- תמיכה בWDS Bridge וכן בWorkgroup Bridge.
- תמיכה בפורטל אישי (Captive Portal)
- תמיכה בניהול מרוחק ובריבוי נקודות –Cluster
- תומך באבטחה משופרת 802.1X Supplicant, SSID to VLAN mapping, ACL, ועוד
- תמיכה בQoS
- תומך בדור החדש של כתובות הIP – IPv6
- מודל: LAPAC1750PRO
- תמיכה בתקן: IEEE 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac
- תמיכה בתדרים: 2.4 GHz and 5 GHz במקביל
- MIMO: 3 x 3
- אנטנה פנימית
- תמיכה בPoE: 802.3at
- ניתן להתקנה על תקרה / קיר
- 2 חיבורים של גיגה למהירות מקסימאלית.
- ספק כוח 12V או דרך POE
תדרים
- 2.412 to 2.462 GHz: channel 1-11
- 5.180 to 5.240 GHz: channel 36, 40, 44, 48
- 5.745 to 5.825 GHz: channel 149, 153, 157, 161, 165
Antenna Gain dBi
- 4.4 dBi@2.4GHz
- 5.2.dBi@5GHz
Transmitted Power
- 802.11b:
- 22 +/- 1.5 dBm @ Channel 6 (All rates)
- 18 +/- 1.5 dBm @ Channel 1 (Bandedge limit)
- 19 +/- 1.5 dBm @ Channel 11 (Bandedge limit)
- 802.11g:
- 22 +/- 1.5 dBm @ Channel 6 (Low rates)
- 21 +/- 1.5 dBm @ Channel 6 (High rates)
- 13 +/- 1.5 dBm @ Channel 1 (Bandedge limit)
- 13 +/- 1.5 dBm @ Channel 11 (Bandedge limit)
- 802.11n 20 MHz:
- 22 +/- 1.5 dBm @ Channel 6 (Low rates)
- 20 +/- 1.5 dBm @ Channel 6 (High rates)
- 13 +/- 1.5 dBm @ Channel 1 (Bandedge limit)
- 13 +/- 1.5 dBm @ Channel 11 (Bandedge limit)
- 802.11n 40 MHz:
- 13 +/- 1.5 dBm @ Channel 6 (All rates)(Bandedge limit)
- 9.5 +/- 1.5 dBm @ Channel 3 (Bandedge limit)
- 12 +/- 1.5 dBm @ Channel 9 (Bandedge limit)
- 5 GHz per chain output power
- UNII-1 (5150-5250 MHz)
- 802.11a: 9.5 +/- 1.5 dBm @ All rates
- 802.11n/ac 20 MHz: 9.5 +/- 1.5 dBm @ All rates
- 802.11n/ac 40 MHz: 11 +/- 1.5 dBm @ All rates
- 802.11ac 80 MHz: 11 +/- 1.5 dBm @ All rates
- UNII-3 and ISM (5725-5835 MHz)
- 802.11a: 21 +/- 1.5 dBm @ Low rates, 19 +/- 1.5 dBm @ High rates
- 802.11ac 20 MHz: 21 +/- 1.5 dBm @ Low rates, 17 +/- 1.5 dBm @ High rates
- 802.11ac 40 MHz: 21 +/- 1.5 dBm @ Low rates, 17 +/- 1.5 dBm @ High rates
- 802.11ac 80 MHz: 20 +/- 1.5 dBm @ Low rates, 17 +/- 1.5 dBm @ High rates
Receiver Sensitivity:
- 2.4 GHz
- 802.11b: -87 dBm @ 11 Mbps, 802.11g: -77 dBm @ 54 Mbps, 802.11n 20 MHz: -70 dBm @ MCS23, 802.11n 40 MHz: -67 dBm @ MCS23
- 5 GHz
- 802.11a: -77 dBm @ 54 Mbps, 802.11ac 20 MHz: -61 dBm @ MCS9, 802.11ac 40 MHz: -58 dBm @ CS9, 802.11ac 80 MHz: -56 dBm @ MCS9
מידות
- 247.00 x 238.00 x 43.30 mm (9.72 x 9.37 x 1.70 in)
- Weight: 0.52 kg (1.15 lb)
Other
- Maximum Power Consumption: 24W
- Compliance Class: Class B, Wireless
- Operating Temperature: 0° to 35° C (32° to 95°F)
- Storage Temperature: -20° to 70°C (-4° to 158°F)
- Operating Humidity: 10% to 85% (non-condensing)
- Storage Humidity: 10% to 90% (non-condensing)
- Regulatory Certification: FCC, CE, IC
Software Specification
- Multiple SSIDs: 16
- VLAN Support: Yes
- Number of VLANs: 17
- SSID to VLAN Mapping: Yes
- Captive Portal: Yes
- Workgroup Bridge: Yes
- WDS Bridge: Yes
- IPv6: Yes
- Access Control per SSID: IPv4, IPv6, and MAC-based
- DiffServ for QoS: Yes
- WEP, WPA, WPA2, 802.1X with RADIUS: Yes
- Rogue AP Detection: Yes
- 802.1X Supplicant: Yes
- Channel Isolation: Yes
- WMM: Yes
- Single/Central Management System: With Cluster
- Bandwidth Utilization: Yes
- Scheduler: Yes
- Band Steering: Yes
- Beamforming: Yes
- Dual Image Support: Yes
- Management Access Control: Mac and IP-based
- Management Interface: Web (http/https), SNMP
- Event Notification : Local Log, Remote Syslog, and Email Alerts
- Network Diagnostics: Log, Ping, and Packet Capture
Next-Generation Wi-Fi Connectivity The Linksys Business Pro Series Wireless-AC Dual-Band Access Point supports the latest 802.11ac technology, a three-time performance increase from 802.11n. Enhancements such as wider 80 MHz channels provide greater data bandwidth while operating in the less-crowded 5 GHz band space. With this increase in Wi-Fi freedom, wireless clients can experience faster speeds while maximizing their performance.
Single Point Control: Cluster The Linksys Business Pro Series Wireless-AC Dual-Band Access Point delivers Cluster System Management, which helps to reduce the costs and complexity of managing multiple wireless access points simultaneously. This Cluster feature simplifies administration and management efforts with a Single Point Control.
Captive Portal The Linksys Business Pro Series Wireless-AC Dual-Band Access Point implements a captive portal to support secure and customized guest Wi-Fi access. The captive portal is also used at many Wi-Fi hotspots to control wireless access in the area.
Flexible Deployment The Linksys Business Pro Series Wireless-AC Dual-Band Access Point can be deployed as a typical access point, as a wireless distribution system (WDS), or as a workgroup bridge to extend your wireless range coverage.
Easy to Use with PoE+ The Linksys Business Pro Series Wireless-AC Dual-Band Access Point is integrated with 802.3at PoE+ capability to eliminate extra power adapters and offer optimal placement. It also provides an intuitive Web administrative interface, easy to set up and easy to use.
Advanced Security Over Wireless The Linksys Business Pro Series Wireless-AC Dual-Band Access Point protects and secures your wireless network with business class security features including Wi-Fi Protected Access (WPA/WPA2), 802.1X Supplicant Authentication, MAC and IP-Based ACL, Rogue AP Detection, SSID-to-VLAN Mapping, Wireless Scheduler, and more.
חוות דעת
אין עדיין חוות דעת.