תיאור
3M™ Volition™
K6ASE RJ45 STP Jack
3M™ Volition™
K6A RJ45 STP Jack with 360° shield and
straight cable entry
3M™ Volition™ K6A RJ45 STP Jack with straight cable entry
The new K6ASE RJ45 jack is a key component of the Volition
Cat.6A system, designed for Class EA and Category 6A on twisted copper
pairs in compliance with the most recent ISO/IEC and TIA standards for
Channel and Permanent Link configurations with 3M cables.
The 360° shielding of the jack facilitates a worry-free Class EA / Category
6A installation. Its design allows an easy, tool-less termination on Volition
Cat6A F/UTP, F/FTP and Cat7 S/FTP cables.
The parameter which causes most difficulty for Ethernet 10Gb/s over
twisted pairs applications (10GBASE-T) is Alien Crosstalk, which is
crosstalk between pairs in neighbouring cables. However, Alien Crosstalk
relates not only to cables but also to RJ45 Jacks, in particular in cross
connects or patch panels where many channels are adjacent.
The 360° shielding of the Volition K6ASE RJ45 Jacks acts like a Faraday
screen around the screened RJ45 which gives unsurpassed protection
against it. The quality of the 360° shielding is maintained in the
connection to the cable thanks to the metal braid of the shielding cap.
This method of wiring is without equal in reducing the noise between
pairs in neighbouring cables.
Applications Standards
– IEEE 802.3 10G BASE-T – ISO/ IEC 11801 Edition 2, Am 1-2
– ISO/ IEC 60603-7-5 mechanical requirements
– EN 50173-1
– ANSI/ TIA/ EIA-568-C-2
Features Benefits
- 360° Metallic shielding
- Immunity to alien crosstalk
- 360° shielding is maintained in the connection to
the cable because of the integral earth braid
- Good transfer impedance to give immunity to electromagnetic
interference
- Re-usable jack
- If a wiring mistake is made there is no need to use a new jack
- Separate wire guide
- Minimised stripping length, with wires all the same length
- Tool-less termination
- No need to untwist pairs before termination
- Very fast and safe termination process
- Connector can be terminated with both solid and
stranded wire
- Enables ‘jack to plug’ cables to be manufactured using
stranded conductors (for use in open office architectures)
- Compact size
- Easier cable management and more space and flexibility to
ensure the cable minimum bend radius is never compromised
- Integral shutter
- Increased dust protection, especially during installation or in a
dirty environment, no additional shuttering required on
faceplates, allows direct mounting into floor boxes and
protects jacks in the patch panel
Specification
Features
- Galvanized copper shielding as protection against the
effects of alien crosstalk
- Galvanized copper cap for the rear of the jack
- Galavanized copper cable cap is reversible to allow for
top or bottom cable entry
- Metal braid on cap gives 360° connection to cable
screen
- Tool-less connection of all eight wires at one time by
closing the metal locking wings
- Wire holder is labelled with both 568A and 568B wire
maps
- Single forked contacts
- Keystone mounting
- Integrated shutter
- White colour (RAL 9010)
Technical characteristics
Conforms to the Channel and Permanent Link performance
parameters of Class EA and Category 6A
Conductor diameter
solid wires: 0,50 to 0,65 mm
stranded wires: 7 x 0,15 to 0,20 mm
Maximum diameter of
wire insulation: 1,6 mm
Lead through resistance: < 200 mW
Insulation resistance: RI > 500 MW
Protection contacts: 1,6 mm gold
חוות דעת
אין עדיין חוות דעת.